RAILMATCH Enamel Authentic Colour 15ml Jars - GENERAL COLOURS, WEATHERING & VARNISH RANGE
RAILMATCH Enamel Authentic Colour - GENERAL COLOURS, WEATHERNG & VARNISH RANGE - 15ml Jars
RailMatch paints have been developed with the modeller in mind and are suitable for brushing or spraying. If using our paints through an airbrush the paint will require thinning by approximately 15-20% enamel thinner. If using weathering shades you may want to “thin” the paint further to create a dusting effect. RailMatch paints are produced with an eggshell finish, with the exception of the weathering and 'faded' colours which are matt. Please remember that when thinning paints the sheen will be reduced as will colour density. This can normally be corrected by using a suitable varnish to finish your model. Please ensure jar products are well stirred prior to use. When airbrushing ensure you are in a well ventilated, dust free environment. For best results build up colour by layers, not one heavy coat. Always ensure models are clean of grease, dust etc. Preparation is important.
All RailMatch paint products are manufactured in Manchester by HMG Ltd. to the highest quality and consistency. HMG are one of the largest paint manufacturers in the UK and their extensive knowledge means RailMatch is probably the best model paint you can buy.
**N.B. Colour renderings shown here are only approximate and will vary from viewing device to viewing device **
400 SIGNAL RED (Satin)
401 SIGNAL YELLOW (Satin)
402 FRAME DIRT (Matt)
403 ROOF DIRT (Matt)
404 LIGHT RUST (Matt)
405 DARK RUST (Matt)
406 SLEEPER GRIME (Matt)
407 MATT VARNISH
408 SATIN VARNISH
409 GLOSS VARNISH
412 WEATHERED BLACK (Matt)
413 ALUMINIUM
414 POLISHED STEEL
415 OILY STEEL
416 BRAKE DUST (Matt)
419 MATT BLACK
420 COAL BLACK (Matt)
421 MATT WHITE
422 CONCRETE (Matt)
423 LIGHT BRICK (Matt)
424 DARK BRICK (Matt)
425 NEW STONE (Matt)
426 WEATHERED STONE (Matt)
427 NEW TARMAC (Matt)
428 WORN TARMAC (Matt)
429 SLATE (Matt)
430 NEW TIMBER (Matt)